Fluke 376 clamp meter


Fluke 376 clamp meter


Fluke 376 clamp meter
The Fluke 376 clamp meter is the ideal tool when measuring currents up to 2500 A AC.
In addition, this instrument is also capable of performing many measurements with a wide measuring range.
True-rms gives correct results.
The Fluke 376 clamp meter is capable of measuring current, voltage or continuity testing.
If you are still confused how to take measurements, this article will help you do it.

Measure AC and DC voltages
Steps to take the measurement:
Step 1: Turn the function switch to V~ or V AC+DC.
Step 2: Connect the black lead to the COM pin and the red lead to the V pin.
Step 3: Measure the voltage by touching the probes to the desired test point on the circuit.
Step 4: See the results displayed on the screen.
Continuity check
Steps to take the measurement:
Step 1: Connect the black lead to the COM pin, the red lead to the V pin.
Step 2: Remove the power from the circuit being tested. Move the knob to the continuous symbol
(symbolized as sound waves).
Step 3: Connect the probes on the whole circuit.
Step 4: If resistance < 30, beep will appear, it means short circuit. If OL is displayed,
ie the circuit is open.
To learn more about Fluke 376, you can refer to the video below:

 Video: